7¢ Bistre 1L46

Adjust Magnified Image Size

Last Updated: Mar 7, 2026

home

7¢ Bistre 1L46

A defective transfer.

Research notes:

The dot in the bottom margin found below the left edge of the 'E' of Cents is constant.

Leo's Notes

Defective transfer – bottom frame

a) The bottom frame is very thin from the right side of the LNB to the left side of the E. The top line of the bottom frame is visible below CE.
b) The bottom frame is weak and the top line is visible from a point to the left of the RNB to the LR corner.
c) The vertical line of the LNB is weak near the top, and the entire bottom line is weak.
d) The vertical and bottom lines of the RNB are thin at the LR corner.

Flaw in Zone 3

Plate Position: 1L46

Not listed in Marler

Format ~ Sheet

Name

This field is required

Please check all boxes that apply.

This page has an obvious error - see my notes in comment section.

This page is duplicated on the site.

This page has broken links

I can ID Marler Type, or the current suggestion is incorrect - See Comment Section

The image is not correct

I can provide an image for this position ~ please contact me.

Comments

Please click the GREEN "Submit" button to send your note to Bill. Thanks!

Thank you for taking the time to help to make the site better. I will be in touch with you shortly.

There was a problem submitting your form. You can email me directly at wgburden@wgburden.ca

We use Statser to measure basic website usage without cookies. The system processes page views, clicks, form submissions without form contents, referrers, browser/device information, error pages, approximate visit duration, and pseudonymous visitor keys. Full IP addresses are not stored permanently by Statser; they are processed briefly on the server to create a pseudonymous visitor key, apply technical exclusions, and optionally resolve approximate GeoIP information. If GeoIP is enabled, the IP address is checked locally against a MaxMind GeoLite2 database to determine the approximate country or city. The visitor IP address is not sent to MaxMind. MaxMind is contacted only to download and update the GeoLite2 database. Detailed data is deleted after the configured detail retention period. For long-term trends, Statser also stores aggregated daily values without individual visitor profiles.